Learn from our step by step instructions. The BETONBLOCK® SYSTEM is very complete, you can find all the products and accessoires you need in one place.
Casting a concrete block or plate is simple
Step 1 - Place empty mold on a steel
First, the mold is placed on a flat surface, for example a steel plate.
Step 2 - Applying oil into the mold
Mold oil (release agent) must be applied to the inside of the mold in order to facilitate removal of the block.
Step 3 - Pouring the concrete
The concrete is poured gradually in order to ensure a proper filling of the cams.
Step 4 - Vibrating
At the same time, the concrete must be vibrated with an electric / pneumatic vibrator for a homogeneous compaction of the concrete.
Step 5 - Leveling
Thereafter, the concrete is smoothed with a trowel. Curing time is dependent on the concrete and the conditions.
Step 6 - Removing pins and wedges
Step 7 - Open the mold
Ready! Give yourself a pat on the back!
For those who prefer a video, here is an instruction video.