Betonblock

Casting in 7 easy steps

Learn from our step by step instructions. The BETONBLOCK® SYSTEM is very complete, you can find all  the products and accessoires you need in one place.

Casting a concrete block or plate is simple

Casting step 1

Step 1 - Place empty mold on a steel

First, the mold is placed on a flat surface, for example a steel plate. 

Casting step 2

Step 2 - Applying oil into the mold

Mold oil (release agent) must be applied to the inside of the mold in order to facilitate removal of the block. 

Casting step 3

Step 3 - Pouring the concrete

The concrete is poured gradually in order to ensure a proper filling of the cams. 

Casting step 4

Step 4 - Vibrating

At the same time, the concrete must be vibrated with an electric / pneumatic vibrator for a homogeneous compaction of the concrete.

Casting step 5

Step 5 - Leveling

Thereafter, the concrete is smoothed with a trowel. Curing time is dependent on the concrete and the conditions. 

Casting step 6

Step 6 - Removing pins and wedges

Step 7 casting  Open Mould


Step 7 - Open the mold

Casting ready

 

Ready! Give yourself a pat on the back!

For those who prefer a video, here is an instruction video.