Pouring concrete

View step-by-step instructions for pouring concrete in the Betonblock® moulds here. The Betonblock® system is very comprehensive and comes with all the products and accessories you’ll need.

Step 1: Place empty mould on a flat surface

First of all, the mould is placed on a flat surface, for example a steel plate.

Step 2: Applying oil to the inside of the mould

Mould oil (release agent) must be applied to the inside of the mould in order to facilitate removal of the block.

Step 3: Start pouring

The concrete is poured gradually to ensure a proper filling of all the nooks and crannies.

Step 4: Compact the concrete with the concrete vibrator

Alongside the pouring of the concrete the fresh concrete has to be compacted. This is achieved by using an immersion vibrator during the pouring process.